Pressure Washing for Stamped Concrete is one of the jobs we do most often in Saint Peters, MO. Typical jobs cost $150-$600, and you approve the price before we begin. For stamped concrete, that means moderate-pressure wash.
The right method for the job
Cleaning solution: A sealer-safe cleaner; a degreaser for oil spots.
Cleaning stamped concrete safely
Stamped and colored concrete is usually protected by a sealer. Washing it well is the first step before resealing, and the color and pattern look much better after both.
Avoid: High pressure that strips sealer unevenly or wears off color release on the surface.
How often: Wash yearly; reseal every 2-3 years.
Signs you need pressure washing for stamped concrete
- Driveway or walkways look dark, gray or streaky
- Green or black growth in shaded areas and along edges
- Slippery surfaces after rain
- Oil, rust or tire marks you can't scrub out
- You're getting ready to sell, seal or paint
Why it gets dirty
- Dirt and pollen that settle into the pores of concrete
- Mold, mildew and algae in damp, shaded spots
- Oil and fluid drips from vehicles
- Rust from sprinklers, furniture and fertilizer
- Tire marks and general foot traffic
What you can do yourself
- Sweep off leaves and loose debris so they don't stain
- Blot fresh oil drips with cat litter or an absorbent right away
- Point sprinklers away from walls and walkways to cut down on rust and hard-water stains
- Rinse pollen off with a garden hose during heavy pollen season
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Etched lines and 'zebra stripes' from holding a narrow tip too close
- Water forced into window frames, door sills and siding laps
- Damaged plants and lawns from chemical runoff
- Injuries: a zero-degree tip can cut skin, and wet surfaces are slippery
How we handle pressure washing for stamped concrete
- Walk the property and note surfaces, stains and anything fragile
- Protect plants, outlets, lights and doors, and move small items
- Pre-treat organic growth and degrease oil spots
- Clean with the right pressure and a surface cleaner for even results
- Rinse, post-treat to slow regrowth, and walk the job with you
How much does pressure washing for stamped concrete cost?
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for stamped concrete
- Driveway Cleaning for Stamped Concrete
- Patio Cleaning for Stamped Concrete
- Pool Deck Cleaning for Stamped Concrete
- Concrete Sealing for Stamped Concrete
Pressure Washing for Stamped Concrete in Saint Peters, MO
In Missouri, concrete has to deal with summer mildew and winter salt and freeze-thaw cycles. Annual cleaning and a sealer every few years help it last.
Besides Saint Peters (ZIP code 63376), we handle pressure washing for stamped concrete in O'Fallon (4 mi), Cottleville (4 mi), Dardenne Prairie (5.9 mi) and Weldon Spring (6.9 mi). Call (555) 010-0000 for a free quote in Saint Peters.
Pressure Washing for Stamped Concrete: frequently asked questions
How much does pressure washing for stamped concrete cost in Saint Peters, MO?
Pressure Washing for Stamped Concrete typically costs $150-$600 for a typical home's driveway, walkways and patio, and usually takes 1-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for pressure washing for stamped concrete?
For stamped concrete: usually 1,500-2,500 PSI, kept even so the sealer isn't stripped in patches. What we avoid: high pressure that strips sealer unevenly or wears off color release on the surface. We keep the pressure even and controlled, with the right tools for the surface.
Is pressure washing for stamped concrete safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule pressure washing for stamped concrete?
Wash yearly; reseal every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.